This course is designed to instruct the technician description and operation of the diesel engines
found on Ford, GM and Dodge trucks. The diesel engines which are covered are the Dodge
Cummins 5.9L CR and the 6.7L. The GM Duramax 6.6L, Ford Powerstroke 6.0L, 6.4L and 6.7L.
Emphasis will be placed on the use of service information, the scan tool, programming
procedures. The use of SCR (Select Catalyst Reduction on newer trucks brings need to discuss
and instruct on operation and repair. Emphasis will be placed on the technician to follow a diagnostic strategy.
Course Objective: Given the training, service information and tools, the technician will repair and diagnose Powerstroke, Duramax and Dodge Cummins diesel drivability complaints. Information provided will aid the technician the ability to follow a diagnostic strategy.
Length of course: Five (5) days - 8:30 AM to 4:30 PM Each Day
The five day course will start with discussion on networks. Have scan tool communication issues? In this portion of the training, we will discuss CAN network and identifying the 16 pin OBD II connector and PIN checks. Wiring diagrams are analyzed and testing is performed on vehicles.
The Powerstroke 6.0L will be introduced and comparisons from the older 7.3L will be discussed. This section of the course will include teardown and demonstrations.
The topics on the Powerstroke 6.0L are:
The course will continue discussion on the piezoelectric common rail fuel injection. This common rail system was introduced on the Powerstroke 6.4L. Instruction will cover the components and tests to perform with the scan tool and tools recommended.
The course will continue with the following subsystems of the Powerstroke 6.4L:
The course will move on to the Duramax 6.6L engines. There are several versions of the Duramax starting with the LB7 and the following are LLY, LBZ, LMM and an overview of the newer LGH and the LML.
Instruction on the Duramax families will entail the following:
The last portion of the course will cover the Dodge Cummins 5.9L and the 6.7L Common rail engines. The Dodge ram equipped with common rail injection on both the 5.9L and the 6.7L have brought issues to technicians. Technical information and procedures are available in this course. The 5.9L with CR(common rail) was introduced in 2003. The use of a high pressure fuel system is diagnosed by system to make an accurate assessment on what failed. The low pressure, and return system are checked and procedures are explained. The Cummins 6.7L is also instructed along with additional emission controls and electronics.
Topics that are also covered are:
*****Technicians attending need to bring a laptop or tablet which has access to Internet Explorer********
Tools and scan tools will be on hand to use on vehicles and engines. You are welcome to bring your scan tool should you have any questions. The course will have technicians using the service information and completing worksheets and discussions which will cover various case studies that will aid in refining the diagnostic process.
Course fee: $ 1,850.00
This fee includes all materials, continental breakfast and lunch for all five (5) days of training, Dinner is on your own. Hotel is not included.